簡要描述：SCG551A002MS,美ASCO導式電磁閥3 Port 3 : Exhaust (NC) - Pressure (NO)4 Connector rototable by 90°5 On request : exhaust port G 1/8 with front side protector (NC only)6 Manual operator possible main
產品型號：-廠商性質：經銷商更新時間：2024-10-15訪 問 量：896SCG551A002MS,美ASCO導式電磁閥
1 Instant fi tting connection for ext. Ø 4mm tube
3 Connector rotatable by 90° ou M12 connector
4 2 Ø 3,5, securing holes Ø 6,5,
counterbores depth 3,5
5 Instant fi tting connection for ext. Ø. 6mm tube
6 2 Ø 4,5 securing holes
(?) + 15 mm for connector clearance
Possibility of left-hand pressure intake
or 2 different pressure intakes by procuring
the set of 2 end subbases cat no.: 35300072
When mounted on DIN rail, it is
recommended to use a securing clip
on the end subbases as
well as on the central subbase
這些接線板可直接安裝在對稱EN 50022
- AFNOR NF C 63015標準導軌上使用2個或多個剪輯
（以包出售剪輯或10 ，目錄號33400036 ） 。
（ 1）設備，可用于2種不同的壓力攝入量。
（2） NC或NO功能是通過使用一個SPECIFI
C NC或NO電磁閥和通過反轉在底板的位置獲得的。
Intant科幻擬合末段分機。 Ø 6毫米
插入尾端件即時網絡擬合末段分機。 Ø 6毫米
分機。直徑4.0mm的即時網絡擬合接線板
(?) + 15 mm for plug removal
U : Pressure entry through any port
1 Port 1 : Pressure (NC) - Exhaust (NO)
2 Port 2 : Outlet
7 Secured by screw CM4 x 35
specifi cations are subject to change without
SCG551A002MS,美ASCO導式電磁閥
點擊交流
